资源类型

期刊论文 155

会议视频 5

年份

2023 7

2022 11

2021 13

2020 10

2019 16

2018 3

2017 7

2016 4

2015 5

2014 10

2013 5

2012 8

2011 7

2010 15

2009 13

2008 4

2007 11

2006 3

2005 1

2003 3

展开 ︾

关键词

悬索桥 5

桥梁工程 5

斜拉桥 4

大跨度桥梁 3

三塔悬索桥 2

南京长江第四大桥 2

大跨桥梁 2

抖振 2

泰州大桥 2

索塔 2

组合梁 2

钢箱梁 2

1860 MPa等级 1

32 m箱梁 1

4250 m 1

700 m跨径级别 1

PPWS 1

V形坑 1

三塔两跨悬索桥 1

展开 ︾

检索范围：

排序： 展示方式：

Strengthening of reinforced concrete beams using fiber-reinforced cementitious matrix systems fabricated with custom-designed mortar and fabrics

《结构与土木工程前沿（英文）》   页码 1100-1116 doi: 10.1007/s11709-023-0967-9

摘要： The performance of a new fiber-reinforced cementitious matrix (FRCM) system developed using custom-designed mortar and fabrics is investigated in this study. The behavior of this system is evaluated in terms of both the flexural and shear strengthening of reinforced concrete beams. Eight beams are designed to assess the effectiveness of the FRCM system in terms of flexural strengthening, and four specimens are designed to investigate their shear behavior. The parameters investigated for flexural strengthening are the number of layers, span/depth ratio, and the strengthening method. Unlike previous studies, custom fabrics with similar axial stiffness are used in all strengthening methods in this study. In the shear-strengthened specimens, the effects of the span/depth ratio and strengthening system type (fiber-reinforced polymer (FRP) or FRCM) are investigated. The proposed FRCM system exhibits desirable flexural and shear strengthening for enhancing the load capacity, provides sufficient bonding with the substrate, and prevents premature failure modes. Considering the similar axial stiffness of fabrics used in both FRCM and FRP systems and the higher load capacity of specimens strengthened by the former, cement-based mortar performs better than epoxy.

关键词： fiber-reinforced cementitious matrix     flexural strengthening     shear strengthening     carbon fiber-reinforced polymer     shear span    

HTML PDF 收藏

Modeling of shear walls using finite shear connector elements based on continuum plasticity

Ulf Arne GIRHAMMAR, Per Johan GUSTAFSSON, Bo KÄLLSNER

《结构与土木工程前沿（英文）》 2017年 第11卷 第2期   页码 143-157 doi: 10.1007/s11709-016-0377-3

摘要： Light-frame timber buildings are often stabilized against lateral loads by using diaphragm action of roofs, floors and walls. The mechanical behavior of the sheathing-to-framing joints has a significant impact on the structural performance of shear walls. Most sheathing-to-framing joints show nonlinear load-displacement characteristics with plastic behavior. This paper is focused on the finite element modeling of shear walls. The purpose is to present a new shear connector element based on the theory of continuum plasticity. The incremental load-displacement relationship is derived based on the elastic-plastic stiffness tensor including the elastic stiffness tensor, the plastic modulus, a function representing the yield criterion and a hardening rule, and function representing the plastic potential. The plastic properties are determined from experimental results obtained from testing actual connections. Load-displacement curves for shear walls are calculated using the shear connector model and they are compared with experimental and other computational results. Also, the ultimate horizontal load-carrying capacity is compared to results obtained by an analytical plastic design method. Good agreements are found.

关键词： shear walls     wall diaphragms     finite element modelling     plastic shear connector     analytical modelling     experimental comparison    

HTML PDF 收藏

Nonlinear numerical simulation of punching shear behavior of reinforced concrete flat slabs with shear-heads

Dan V. BOMPA, Ahmed Y. ELGHAZOULI

《结构与土木工程前沿（英文）》 2020年 第14卷 第2期   页码 331-356 doi: 10.1007/s11709-019-0596-5

摘要： This paper examines the structural response of reinforced concrete flat slabs, provided with fully-embedded shear-heads, through detailed three-dimensional nonlinear numerical simulations and parametric assessments using concrete damage plasticity models. Validations of the adopted nonlinear finite element procedures are carried out against experimental results from three test series. After gaining confidence in the ability of the numerical models to predict closely the full inelastic response and failure modes, numerical investigations are carried out in order to examine the influence of key material and geometric parameters. The results of these numerical assessments enable the identification of three modes of failure as a function of the interaction between the shear-head and surrounding concrete. Based on the findings, coupled with results from previous studies, analytical models are proposed for predicting the rotational response as well as the ultimate strength of such slab systems. Practical recommendations are also provided for the design of shear-heads in RC slabs, including the embedment length and section size. The analytical expressions proposed in this paper, based on a wide-ranging parametric assessment, are shown to offer a more reliable design approach in comparison with existing methods for all types of shear-heads, and are suitable for direct practical application.

关键词： non-linear numerical modelling     concrete damage plasticity     RC flat slabs     shear-heads     punching shear    

HTML PDF 收藏

Behaviour of self-centring shear walls——A state of the art review

《结构与土木工程前沿（英文）》 2023年 第17卷 第1期   页码 53-77 doi: 10.1007/s11709-022-0850-0

摘要： The application of unbonded post-tensioning (PT) in structural walls has led to the development of advanced self-centring (rocking) shear wall systems that has significant advantages, including accelerated construction due to the incorporation of prefabricated elements and segmental construction for different materials (e.g., concrete, masonry, and timber), reduced residual drifts, and little damage upon extreme seismic and wind loads. Concrete, masonry, and timber are often used for the construction of unbonded PT structural wall systems. Despite extensive research since the 1980s, there are no well-established design guidelines available on the shear wall configuration with the required energy dissipation system, joint’s locations and acceptance criteria for shear sliding, confinement, seismic performance factors, PT loss, PT force range and residual drifts of shear walls subjected to lateral loads. In this research a comprehensive state-of-the-art literature review was performed on self-centring shear wall system. An extensive study was carried out to collect a database of 100 concrete, masonry, and self-centring shear wall tests from the literature. The established database was then used to review shear walls’ configurations, material, and components to benchmark requirements applicable for design purposes. The behaviour of concrete, masonry and timber shear walls were compared and critically analysed. The general behaviour, force-displacement performance of the walls, ductility, and seismic response factors, were critically reviewed and analysed for different self-centring wall systems to understand the effect of different parameters including configurations of the walls, material used for construction of the wall (concrete, masonry, timber) and axial stress ratio. The outcome of this research can be used to better understand the behaviour of self-centring wall system in order to develop design guidelines for such walls.

关键词： self-centring shear walls     rocking walls     energy dissipation     seismic performance factors     PT loss     residual drift    

HTML PDF 收藏

Prediction of the shear wave velocity

Amoroso SARA

《结构与土木工程前沿（英文）》 2014年 第8卷 第1期   页码 83-92 doi: 10.1007/s11709-013-0234-6

摘要： The paper examines the correlations to obtain rough estimates of the shear wave velocity from non-seismic dilatometer tests (DMT) and cone penetration tests (CPT). While the direct measurement of is obviously preferable, these correlations may turn out useful in various circumstances. The experimental results at six international research sites suggest that the DMT predictions of from the parameters (material index), (horizontal stress index), (constrained modulus) are more reliable and consistent than the CPT predictions from (cone resistance), presumably because of the availability, by DMT, of the stress history index .

关键词： horizontal stress index     shear wave velocity     flat dilatometer test     cone penetration test    

HTML PDF 收藏

Control mode selection for modal control of long-span arch bridge

Zhengying LI, Zhengliang LI,

《结构与土木工程前沿（英文）》 2009年 第3卷 第4期   页码 401-406 doi: 10.1007/s11709-009-0052-z

摘要： For seismic control of arch bridge, a model reduction of long-span arch bridge was implemented based on modal analysis. As for the critical mode selection, an approach based on the maximum modal displacement was presented. This approach takes into consideration the effect of external seismic excitation and is more reasonable than only considering dynamic bridge characteristics based on a modal contribution ratio. The time domain and frequency domain analysis method were used to verify the simplified model of the Nimu arch bridge in Tibet as an example. The numerical results show that the method of maximal modal displacement better analyze long-span arch bridge when multisupport seismic excitation must be considered. The reduced-order system also is more in line with the performance of the original model.

关键词： selection     reduced-order     excitation     long-span     simplified    

HTML PDF 收藏

On braced trapezoidal corrugated steel shear panels: An experimental and numerical study

《结构与土木工程前沿（英文）》 2023年 第17卷 第3期   页码 396-410 doi: 10.1007/s11709-023-0934-5

摘要： In this study, a new system consisting of a combination of braces and steel infill panels called the braced corrugated steel shear panel (BCSSP) is presented. To obtain the hysteretic behavior of the proposed system, the quasi-static cyclic performances of two experimental specimens were first evaluated. The finite element modeling method was then verified based on the obtained experimental results. Additional numerical evaluations were carried out to investigate the effects of different parameters on the system. Subsequently, a relationship was established to estimate the buckling shear strength of the system without considering residual stresses. The results obtained from the parametric study indicate that the corrugated steel shear panel (CSSP) with the specifications of a = 30 mm, t = 2 mm, and θ = 90° had the highest energy dissipation capacity and ultimate strength while the CSSP with the specifications of a = 30 mm, t = 2 mm, and θ = 30° had the highest initial stiffness. It can thus be concluded that the latter CSSP has the best structural performance and that increasing the number of corrugations, corrugation angle, and plate thickness and decreasing the sub-panel width generally enhance the performance of CSSPs in terms of the stability of their hysteretic behaviors.

关键词： trapezoidal corrugated plate     steel shear panel     braced steel shear panel     experimental study     buckling resistance.    

HTML PDF 收藏

State-of-the-art of long-span bridge engineering in China

XIANG Haifan, GE Yaojun

《结构与土木工程前沿（英文）》 2007年 第1卷 第4期   页码 379-388 doi: 10.1007/s11709-007-0051-x

摘要： This paper introduces the state-of-the-art of longspan bridge engineering in China with emphases on recent long-span bridge projects, bridge deck configuration and material, design codes of long-span bridges and improvement of aero

关键词： bridge engineering     state-of-the-art     long-span bridge     configuration     improvement    

HTML PDF 收藏

Experimental study on shear behavior of reinforced concrete beams with web horizontal reinforcement

Dong XU,Yu ZHAO,Chao LIU

《结构与土木工程前沿（英文）》 2014年 第8卷 第4期   页码 325-336 doi: 10.1007/s11709-014-0080-1

摘要： In determining the shear capacity of reinforced concrete beams, current codes do not provide any calculation method to evaluate the influence of web horizontal reinforcement, although they exist as structural reinforcements (or skin reinforcement). The present paper comprises results of 11 reinforced concrete beams in an effort to investigate the influence of web horizontal reinforcement on the shear behavior of reinforced concrete beams. The primary design variables are the shear-span-depth ratio, different reinforcement ratio of stirrups and web horizontal reinforcement. Influence of web horizontal reinforcement on crack patterns and failure mode was studied. It was found that web horizontal reinforcement can increase the shear capacity of the beams and restrain growth of inclined cracks effectively. Test results are very valuable, as very few references of shear tests can be found focusing on the effect of web horizontal reinforcement on the shear capacity of the beams.

关键词： reinforced concrete beam     shear strength     web horizontal reinforcement     experiments    

HTML PDF 收藏

综采大跨度回采巷道锚杆—锚索减跨支护技术研究

朱永建,罗一新,张道兵

《中国工程科学》 2010年 第12卷 第3期   页码 51-55

摘要：

针对综采大跨度回采巷道顶板难以控制的现场实际，在分析了单层岩层稳定性的主要影响因素基础上，运用UDEC3.0数值模拟软件深入研究了由单层岩层组合而成的回采巷道顶板稳定性的影响因素及其变形破坏规律。提出了通过合理布置锚索的位置，达到锚杆—锚索协同支护的减跨作用，在此基础上发挥锚杆的组合梁（拱）及悬吊作用以控制大跨度回采巷道冒顶事故的新的支护思想，并将其应用于神东矿区补连塔煤矿大跨度回采巷道，取得了良好的现场应用效果。

关键词： 大跨度     回采巷道     顶板     锚杆—锚索     减跨支护    

HTML PDF 收藏

Effect of loading rate on shear strength parameters of mechanically and biologically treated waste

《环境科学与工程前沿（英文）》 2022年 第16卷 第12期 doi: 10.1007/s11783-022-1595-7

摘要：

● Mechanical behavior of MBT waste affected by loading rate was investigated.

关键词： Mechanically and biologically treated waste     Landfill     Triaxial test     Loading rate     Axial strain     Shear strength parameter    

HTML PDF 收藏

Design and construction of super-long span bridges in China: Review and future perspectives

《结构与土木工程前沿（英文）》 2020年 第14卷 第4期   页码 803-838 doi: 10.1007/s11709-020-0644-1

摘要： Super-long span bridges demand high design requirements and involve many difficulties when constructed, which is an important indicator to reflect the bridge technical level of a country. Over the past three decades, a large percentage of the new long-span bridges around the world were built in China, and thus, abundant technological innovations and experience have been accumulated during the design and construction. This paper aims to review and summarize the design and construction practices of the superstructure, the substructure, and the steel deck paving of the long-span bridges during the past decades as well as the current operation status of the existing long-span bridges in China. A future perspective was given on the developing trend of high-speed railway bridge, bridge over deep-sea, health monitoring and maintenance, intellectualization, standard system, and information technology, which is expected to guide the development direction for the construction of future super long-span bridges and promote China to become a strong bridge construction country.

关键词： long-span bridges     steel box girder     design technology     construction technology     review and future perspectives    

HTML PDF 收藏

Micromixing performance of the teethed high shear mixer under semi-batch operation

《化学科学与工程前沿（英文）》 2022年 第16卷 第4期   页码 546-559 doi: 10.1007/s11705-021-2069-3

摘要： Semi-batch operated reaction processes are necessary for some competitive reaction systems to achieve a desirable process selectivity and productivity of fine chemical products. Herein the structural and operating parameters of the teethed high shear mixers were adjusted to study the micromixing performance in the semi-batch operated system, using the Villermaux/Dushman reaction system. The results indicate that the rising of the rotor speed and the number of rotor teeth, the decrease of the width of the shear gap and the radial distance between the feed position and the inner wall of stator can enhance the micromixing level and lead to the decrease of the segregation index. Additionally, computational fluid dynamics calculations were carried out to disclose the evolution of the flow pattern and turbulent energy dissipation rate of the semi-batch operated high shear mixer. Furthermore, the correlation was established with a mean relative error of 8.05% and R2 of 0.955 to fit the segregation index and the parameters studied in this work, which can provide valuable guidance on the design and optimization of the semi-batch operated high shear mixers in practical applications.

关键词： high shear mixer     semi-batch operation     micromixing performance     Villermaux/Dushman system     segregation index    

HTML PDF 收藏

Innovative steel-UHPC composite bridge girders for long-span bridges

Xudong SHAO, Lu DENG, Junhui CAO

《结构与土木工程前沿（英文）》 2019年 第13卷 第4期   页码 981-989 doi: 10.1007/s11709-019-0531-9

摘要： Steel and steel-concrete composite girders are two types of girders commonly used for long-span bridges. However, practice has shown that the two types of girders have some drawbacks. For steel girders, the orthotropic steel deck (OSD) is vulnerable to fatigue cracking and the asphalt overlay is susceptible to damage such as rutting and pot holes. While for steel-concrete composite girders, the concrete deck is generally thick and heavy, and the deck is prone to cracking because of its low tensile strength and high creep. Thus, to improve the serviceability and durability of girders for long-span bridges, three new types of steel-UHPC lightweight composite bridge girders are proposed, where UHPC denotes ultra-high performance concrete. The first two types consist of an OSD and a thin UHPC layer while the third type consists of a steel beam and a UHPC waffle deck. Due to excellent mechanical behaviors and impressive durability of UHPC, the steel-UHPC composite girders have the advantages of light weight, high strength, low creep coefficient, low risk of cracking, and excellent durability, making them competitive alternatives for long-span bridges. To date, the proposed steel-UHPC composite girders have been applied to 14 real bridges in China. It is expected that the application of the new steel-UHPC composite girders on long-span bridges will have a promising future.

关键词： steel-UHPC composite bridge girder     long-span bridge     orthotropic steel deck     fatigue cracking     durability    

HTML PDF 收藏

Predicting the capacity of perfobond rib shear connector using an ANN model and GSA method

Guorui SUN; Jun SHI; Yuang DENG

《结构与土木工程前沿（英文）》 2022年 第16卷 第10期   页码 1233-1248 doi: 10.1007/s11709-022-0878-1

摘要： Due to recent advances in the field of artificial neural networks (ANN) and the global sensitivity analysis (GSA) method, the application of these techniques in structural analysis has become feasible. A connector is an important part of a composite beam, and its shear strength can have a significant impact on structural design. In this paper, the shear performance of perfobond rib shear connectors (PRSCs) is predicted based on the back propagation (BP) ANN model, the Genetic Algorithm (GA) method and GSA method. A database was created using push-out test test and related references, where the input variables were based on different empirical formulas and the output variables were the corresponding shear strengths. The results predicted by the ANN models and empirical equations were compared, and the factors affecting shear strength were examined by the GSA method. The results show that the use of ANN model optimization by GA method has fewer errors compared to the empirical equations. Furthermore, penetrating reinforcement has the greatest sensitivity to shear performance, while the bonding force between steel plate and concrete has the least sensitivity to shear strength.

关键词： perfobond rib shear connector     shear strength     ANN model     global sensitivity analysis    

HTML PDF 收藏

标题 作者 时间 类型 操作

Strengthening of reinforced concrete beams using fiber-reinforced cementitious matrix systems fabricated with custom-designed mortar and fabrics

期刊论文

Modeling of shear walls using finite shear connector elements based on continuum plasticity

Ulf Arne GIRHAMMAR, Per Johan GUSTAFSSON, Bo KÄLLSNER

期刊论文

Nonlinear numerical simulation of punching shear behavior of reinforced concrete flat slabs with shear-heads

Dan V. BOMPA, Ahmed Y. ELGHAZOULI

期刊论文

Behaviour of self-centring shear walls——A state of the art review

期刊论文

Prediction of the shear wave velocity

Amoroso SARA

期刊论文

Control mode selection for modal control of long-span arch bridge

Zhengying LI, Zhengliang LI,

期刊论文

On braced trapezoidal corrugated steel shear panels: An experimental and numerical study

期刊论文

State-of-the-art of long-span bridge engineering in China

XIANG Haifan, GE Yaojun

期刊论文

Experimental study on shear behavior of reinforced concrete beams with web horizontal reinforcement

Dong XU,Yu ZHAO,Chao LIU

期刊论文

综采大跨度回采巷道锚杆—锚索减跨支护技术研究

朱永建,罗一新,张道兵

期刊论文

Effect of loading rate on shear strength parameters of mechanically and biologically treated waste

期刊论文

Design and construction of super-long span bridges in China: Review and future perspectives

期刊论文

Micromixing performance of the teethed high shear mixer under semi-batch operation

期刊论文

Innovative steel-UHPC composite bridge girders for long-span bridges

Xudong SHAO, Lu DENG, Junhui CAO

期刊论文

Predicting the capacity of perfobond rib shear connector using an ANN model and GSA method

Guorui SUN; Jun SHI; Yuang DENG

期刊论文